Eib bus installation

Today KNX is paramount as ISO standard for fieldbus control in the building services and allows a manufacturer the most advantageous cross-discipline communication of heating, lighting, blinds, ventilation and security systems. Server supports other bus systems, which are established in the building control system.

This allows you to visualize a SystemTera. Server not only your KNX installation, but also display values of a Modbus electricity meter or set up a gateway between devices with different standards. Server is from the perspective of ETS and requires no device configuration, and therefore does not have to be applied there. Just use the infrastructure of SystemTera. This saves material cost and space in your switching cabinet.

With the SystemTera. Cloud you have full and secure access to your home or business space. You can switch on and off a consumer or just have monitoring and so be sure that everything is in order. If in your installation individual components from a certain manufacturer are no longer available, you can easily replace them with devices from other manufacturers.

Side Menu. Vizualisation of KNX installations. Housing configurator. Servo Configurator. Chain Configurator. FO Configurator. Show video External content from YouTube Please click to load the video. Accessories Other customers also bought Application range The product is designed for use in building management, e. The cable can be laid on or under plaster; in pipes, cable ducts; in dry, damp or wet environments.

Conductor resistance loop : max. With a transmission rate of 9. A European installation bus is divided into 15 ranges with 15 lines and subscribers per main line or 64 subscribers per line. Up to different bus subscribers can be controlled separately with this. As such, the physical address 4. This is limited by the voltage supply. In order to expand the lines in the structure as well, they are connected via the main line by line couplers which are located in control cabinets.

This main line can have max. As described above, one main line connects a maximum of 15 lines and forms one range. Backbones are used to connect ranges, and they themselves need their own supply voltage.

A European Installation Bus includes a freely programmable logical structure. Related actuators and sensors are connected to each other via a group address.

Thanks to the easy programmability, the relation between the switch and the lamp for example can be changed at any time without laying cables.

As a European installation bus is an open standard and each manufacturer has full access to the required technological data, there is now considerable product diversity, however all of them can communicate with each other. A European installation bus has a uniform packet structure: Programming is performed with uniform software, the engineering tool software.

The packet structure in the time sequence looks as follows:. The control byte determines the priority of the packet. This can be used to differentiate between a standard packet and an expanded packet.

The source address is composed of two bytes.